|
Stevens PlasticsHerrman,
MO
Other than the size, the silver guns are well done, along with Wyatt Earps hat, and they are hard to distinguish from early pieces. Since Stevens never sold the accessories for Thunderbird and Earp individually, they have not flooded the market. The brown saddle used with Dale Evans and Earp were almost identical to the Hoby Gillman saddle of 30 plus years ago. The rest of the accessories and figures can be distinguished fairly easily once you have seen originals. Towards the end, Steven sold some of the parts unpainted. Some of the Steven parts show up on eBay and auctions now, and of course some show up on sets being sold as vintage. The stirrups on some of those unpainted saddles are sometimes used to repair old ones. |
|
(Photo from Stevens Literature for reference only.) |
![]() Originally sold through J.C. Penneys, this set was later sold direct from Stevens and a few distributors. Trigger is painted palamino color and then white overpaint, however they left off the white blaze on Triggers head. He came with an all blue saddle with silver dots and two silver guns along with his white hat. The figure was a bit rough at the joints on some and the red was not as intense as early models. The J.C.Penneys sets came in a generic cardboard box but was later repleced with a colorful see through box. |
![]() Actually a nice set. They used a Hoby Gillman style saddle (with a rifle hole) instead of the traditional Dale saddle. The purple is more on the reddish plum side than early Dales. The hat and color of Buttermilk are slightly off white. She comes with one silver gun in a very nice clear front package. |
![]() Another nice set and quite true to the original. The Stevens flag poles are much thicker than the old bamboo ones and the hole in his hand are a dead giveaway. Great sword and hat. The saddle if very nice but seems to be a little thicker on parts of the saddle and the color is a little brighter than early pieces. Ajax, his horse is almost a dead ringer for the original. It came in an attractive see-through box. |
![]() The hat, figure, sword and saddle on this piece are very close to the early sets. Again, the yellow on the saddle is a little brighter and the stirrup straps are a bit thicker. For some reason, they substituted a Chubby horse for the normal standing walking horse. They also left off the breascollar, common on most early sets. The plastic flag pole has a small piece ground down to fit in his right hand better. It came in an attractive see-through box. |
![]() Just after a couple of Wyatt Earp movies hit the theaters, they released this Earp which was quite different than vintage sets. The shirt was painted off white instead of white plastic, the pants were painted black instead of green, and they left off a lot of the silver dots and detailing on the bunbelt and holster. Nice hat. Silver Buntline and pistol instead of brown. Cropped mane horse with whites painted in the eyes (the originals has a full mane). Gillman style brown saddle with rifle hole instead of the brown and yellow one. |
![]() The last set Stevens made following the Wyatt Earp set was the version shown here. To my knowledge, there were only 12-24 ever produced. Gail Fitch suggests that there might be as many as 100 in her Hartland Horseman book (Schiffer Publishing1999). The markings were hand painted. It is a really nice set...best of the group but very rare. |
![]() |
|
In the '80s, Stevens Plastics acquired the Hartland molds and the name and started remaking a few of the sets. At roughly $39.95 per set, they would not have been considered a kids toy, but a collectors piece. According to Stevens pre-release documentation, they planned on making a standing Maverick gunfighter. Similar to the Wyatt Earp movies, the Maverick movie was being released in theaters that year. Too bad they didnt finish this one! As of now, Stevens quit selling the Hartlands In the past few months an unpainted Wyatt Earp surfaced that came from the Stevens Plastics facility. It was reported to me that the piece came from an employee of the Stevens plant and the set, along with others, were test run pieces to evaluate the conditions of the Gunfighter molds. I have also heard that 9 of the 10 gunfighter molds were useable. Masterson was the only missing mold. Recently, a new venture called Hartland Collectibles, LLC has obtained the molds and all name rights and has announced plans to continue the tradition. I spoke with Ken Movold from the new company and he assured me that the molds were moved to high ground before the Missouri floods and were not damaged by the water. |
![]() Around 1992, Stevens Plastics in Missouri began offering this set through J.C. Penney's mail order Christmas Catalog. It shipped in a generic cardboard box. It was later offered direct through Stevens and a few distributors and shipped in an attractive box. The quality of production and painting on this set was not up to vintage Hartland collectors standards. This piece is much more white on the plastic and the red paint has a rough feel to it. I doubt you will be fooled! Mold Marks ©Hartland Plastics Inc -back of the fringe on the left sleeve. |
|
Mold Mark |
|
Mold Mark: ©Hartland Plastics, Inc. inside right boot. |
|
Mold Mark |
![]() This set was produced in late 1993 or 1994 in apparent connection with the two releases of Wyatt Earp movies, though I dont think there was a specific licensing agreement with either. The took some additional artisitc licensing with this set by painting his pants black, eleminating some of the trim on the gun belt. Instead of white plastic, they painted his shirt off white and his vest is generally pea green. He shipped with a silver Buntline and regular silver pistol along with a black hat. Mold Mark©Hartland Plastics, Inc. on the left holster.. |
![]() In 1994, Stevens/Hartland recreated the Chief Thunderbird set again. The newer set seems to be made of acetate plastic. Sketchy reports suggest there were only between 24 and 100 of the 1994 sets made. He carried a shield, tomahawk, lance, and knife but lacked the bow. Mold Marks Thunderbird figure: ©Hartland Plastics, Inc. on the back of the fringe on the right leg |